Iron-on Patch Instructions: 1. Lay the clean garment on a flat surface. 2. Turn iron on. Ensure steam is off with no water in the iron. Switch to cotton setting. (Typically a higher temp) 3. Place the patch (facing up) onto garment where desired. Place a towel or cloth over the patch area. 4. Apply pressure with the iron in circular motions 1 - 3 mins. over patch area to ensure adhesion. Allow patch to cool. 5. Flip the garment inside-out, apply direct heat with iron onto the areas until adhered. Once again, allow the patch to cool. 6. Check that patch has adhered completely. (Repeat steps 4 - 6 if necessary.)
A reusable mask with the Stillwell logo on it. Limited quantities available.
Disclaimer: The mask should not be used (1) in any surgical setting or where significant exposure to liquid, bodily or other hazardous fluids, may be expected; (2) in a clinical setting where the infection risk level through inhalation exposure is high; or (3) in the presence of a high intensity heat source or flammable gas. Stillwell LLC make no warranties, either express or implied, that the mask prevents infection or the transmission of viruses or diseases.